Synthesis and characterization of MCM-48 tubular membranes

MCM-48 membranes have been prepared on alumina supports of different pore sizes. A battery of characterization techniques has been used to study the physical properties and the quality of the membranes prepared. The highest quality membranes were prepared on supports with pore size of up to 60 nm. The MCM-48 membranes were tested in the separation of gas phase mixtures and a cyclohexane/O₂ selectivity higher than 270 was obtained. The selective separation of organic compounds from inert components is a result of the cooperative effects of capillary condensation in MCM-48 pores and of the specific interactions of the permeating compounds and the membrane material.     

Square‐Planar Carbonylchlororhodium(I) Complexes Containing trans‐Spanning Diphosphine Ligands as Catalysts for the Carbonylation of Methanol

The rhodium(I) complexes trans‐[Rh(diphos)(CO)Cl] 7 (diphos=pbpb), 8 (diphos=nbpb), and 9 (diphos=cbpb) were synthesized (Scheme 4) and used as catalysts for the carbonylation of MeOH to AcOH (Scheme 1). The trans coordination imposed by the rigid C‐spacer framework of the diphos ligands pbpb, nbpb, and cbpb, demonstrated by ³¹P‐NMR and IR spectroscopy of 7 – 9 and unambiguously confirmed by single‐crystal X‐ray structure analysis of 7 , improved the thermal stability of the rhodium(I) system under carbonylation conditions and, hence, the catalytic performance of the complexes. For the catalytic carbonylation of MeOH, the active catalyst could be prepared in situ from the mixture of [Rh(CO)₂Cl]₂ and the corresponding diphos ligand pbpb, nbpb, or cbpb, giving the same results as carbonylation in the presence of the isolated complexes 7, 8 or 9 (see Table). The highest activity was observed for complex 7 (or the mixture [Rh(CO)₂Cl]₂/pbpb, the catalytic turnover number (TON) being 950 after 15 min (170°, 22 bar).     

Thermogravimetric study of some crosslinked copolymers based on poly(acrylonitrile-co-divinylbenzene)

Copolymer networks based on acrylonitrile (AN)/divinylbenzene (DVB) have been investigated by thermogravimetric analysis (TG) to evaluate their thermal stability in nitrogen atmosphere. Thermal stability was determined from TG-DTG curves to investigate the influence of AN and DVB in the synthesis of copolymers on the copolymer thermal properties. The TG and DTG curves of copolymers clearly show two thermodegradation stages. The solid residues produced after thermodegradation stages were analyzed by FTIR and elemental analysis (CHN). The decomposition temperatures were dependent on amount of AN and DVB used as the crosslinking agent. The degradation temperatures of copolymers were influenced by the diluent system during their synthesis. FTIR analyses indicate that the cyclization of the polymer proceeds before any mass loss.     

Synthesis, Electrochemistry and Crystal Structure of the [Ni36Pt4(CO)45]6− and [Ni37Pt4(CO)46]6− Hexaanions

The [Ni₃₆Pt₄(CO)₄₅]^6- and [Ni₃₇Pt₄(CO)₄₆]^6- clusters have been obtained in mixture upon reaction in acetonitrile of [Ni₆(CO)₁₂]^2- salts with K₂PtCl₄ in a 2.5:1 molar ratio. The two hexaanions were indistinguishable by spectroscopic techniques. Crystallization of their trimethylbenzylammonium salts led to crystals of composition 0.5[NMe₃CH₂Ph]₆[Ni₃₆Pt₄(CO)₄₅]-0.5[NMe₃CH₂Ph]₆[Ni₃₇Pt₄(CO)₄₆]·C₃H₈O, hexagonal,space group P6₃ (No. 173), a=17.853(9), c=27.127(13) Å, Z=2; final R=0.057. The metal core of the [Ni₃₆Pt₄(CO)₄₅]^6- anion consists of a Pt₄ tetrahedron fully encapsulated in a shell of 36 Ni atoms belonging to a very distorted and incomplete ₅ tetrahedron. The [Ni₃₇Pt₄(CO)₄₆]^6- hexaanion derives from the former by capping the unique triangular face of the metal polyhedron with an additional Ni(CO) fragment. The [Ni₃₆Pt₄(CO)₄₅]^6--[Ni₃₇Pt₄(CO)₄₆]^6- mixture is rapidly degraded to the known [Ni₉Pt₃(CO)₂₁]^4- cluster by exposure to carbon monoxide. Its reaction with protic acids initially affords the corresponding [H_6-nNi₃₆Pt₄(CO)₄₅]^n--[H_6-nNi₃₇Pt₄(CO)₄₆]^n- (n=5, 4) derivatives, and eventually leads to rearrangement to the known [H_6-n Ni₃₈Pt₆(CO)₄₈]^n- species. Both [Ni₃₆Pt₄(CO)₄₅]^6--[Ni₃₇Pt₄(CO)₄₆]^6- and [HNi₃₆Pt₄(CO)₄₅]^5--[HNi₃₇Pt₄(CO)₄₆]^5- mixtures have been chemically and electrochemically reduced to their corresponding [Ni₃₆Pt₄(CO)₄₅]^n--[Ni₃₇Pt₄(CO)₄₆]^n- (n=7–9) and [HNi₃₆Pt₄(CO)₄₅]^n--[HNi₃₇Pt₄(CO)₄₆]^n- (n=6–8) mixtures.     

Determination of uncertainty for hardness measurement: proposal of the standard,available software

After the next revision of the ISO-standards for hardness testing (ISO 6506–6508) an estimation of the uncertainty (ISO/IEC 17025, ISO 5725) is mandatory. The two proposed approaches of part one (ISO 6506–6508) of the ISO Standards for hardness are exemplified. The calculation approach implemented in an Excel-based file, which is available via , is announced.Presented at the Metro Trade Workshop on Traceability and Measurement Uncertainty in Testing, 30–31 January 2003, Berlin, Germany     

Collection and analytical characterisation of the atmospheric particulate in the city of Bari

In this paper an application of new procedures for atmospheric particulate analysis is illustrated. PM10, PAHs (benzo[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[j]fluoranthene (BjF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1, 2, 3-cd]pyrene (Ip), dibenzo[a, h]anthracene (DbA)) and heavy metals (Cu, Ni, Zn, Co, Mn, Cd, Fe and Pb) were investigated. PM10 determination was performed by gravimetric method, PAHs were measured by GC-MS, and heavy metals by HPIC. An air quality monitoring campaign on the territory of Bari municipality has been organised, and its results are shown.     

Sulfur speciation by capillary zone electrophoresis: conditions for sulfite stabilization and determination in the presence of sulfate, thiosulfate and peroxodisulfate

Capillary zone electrophoresis (CZE) was used for the separation of the sulfur species SO3(2-), SO4(2-), S2O(3-) and S2O8(2-). Using an electrolyte system with 9.5 mmol L(-1) potassium chromate as UV-absorbing probe and 1 mmol L(-1) diethylenetriamine (DETA) as electroosmotic flow modifier, various possibilities for the stabilization of sulfite and electrophoretic separation of the sulfur anions were investigated. By adding 5% propanol as a stabilizer to both the working electrolyte and the sample solution, a good stabilization for sulfite and a separation of the sulfur anions in a short analysis time (4 min) was achieved. The advantages by using propanol instead of other stabilizers often used in analytical techniques are discussed. The electrophoretic separation of the sulfur anions was optimized with respect to the pH of the working electrolyte and concentration of the electroosmotic flow modifier (DETA). The detection limits achieved for SO3(2-), SO4(2-), S2O3(2-) and S2O8(2-) were 0.35, 0.25, 0.78 and 0.80 mg L(-1), respectively.     

TRIPLET YIELD OF MEROCYANINE 540 IN WATER IS WAVELENGTH DEPENDENT

Monomers and aggregates of Merocyanine 540 (MC540) in water are able to photoisomerize. The shape of the photoisomer absorption spectrum is very similar to that of the ground state. Triplet state of MC540 in water has been produced by energy transfer from triplet anthracene and displays a broad absorption spectrum between 600 and 700 nm. The triplet state may also be produced by direct excitation of MC540 with UV light. However, when the dye is excited by visible light, no triplet state absorbance in the red could be detected so that the triplet yield of MC540 in water seems to be excitation wavelength dependent.     

Analytic correlated wave functions in momentum space and related properties of helium like ions

We obtain analytic correlated wave functions in momentum space as the Fourier transform of correlated wave functions which are able to incorporate almost all of the correlation energy for the ground-state of two-electron atoms. Then we study the atomic momentum-density, the Compton profile and the elastic and inelastic scattering factors for this kind of wave functions. The scattering factors are also compared with the ones provided by a more accurate correlated wave function. All the calculations can be analytically performed, provided the correlated wave function in position space has been determined.